NEW PERIPHERAL JET WATER PUMP QB90

sku :

GPT155

$99.00 Inc. GST

Sold out

Out of stock

Want to be notified when this product is back in stock?

Overview

  • 100% copper wire, and automatic wiring
  • C&U bearings ( the best bearing brand of China )
  • Cold-rolled silicon steel sheet, with high-speed punching, improve the efficiency and precision
  • 304 Stainless steel welding shaft
  • Demagnetization of stainless steel nuts
  • Anti-rust treatment castings and electrophoresis
  • New testing equipment

Description

Applied to pumping such liquid which is clean, no solid matter or frictional matter, low viscous, noncorrosive, non-crystallizable, chemically neutral and close to water. Such as:

  • Tank filling
  • Domestic water supply
  • Water transfer
  • Pressure boosting Irrigation

volumetric water pumps able to offer high pressure in relation to comparatively low powers and which have particularly steady operating curves. They are qualified in domestic fittings, to increase the system pressure in aqueducts and for automatic water distribution by small autoclave tanks or by hydrosphere units. for the correct function of the pump, use clean water or non-aggressive liquid only ,with out sand or other solid impurity.

Operating Conditions:

  • Liquid temperature up to 60°C;
  • Ambient temperature up to 40°C;
  • Total Suction lift up to 9m;
  • Continuous duty

Motor:

  • Two-pole induction motor (n=2850r.p.m);
  • Insulation Class B;
  • Protection IP44

Material:

  • Pump body: Cast iron;
  • Motor support: Cast iron;
  • Motor housing: Aluminum;
  • Impeller: Brass;
  • Shaft with rotor: 45# Steel, AISI 416;
  • stainless steel if request;
  • Mechanical seal: Carbon/Ceramic;
  • Single phase 220V-240V/50Hz;
  • Power: 0.50Kw/0.5HP
  • Max. Flow Rate: 50L/min
  • Max. Hhead: 60m
  • Max. suction length: 9m
  • Theory: Vortex Pump
  • Structure: Single-stage Pump
  • Standard or Nonstandard: Standard
  • Pressure: High Pressure
  • Certification: ISO,CE,CQC and SGS
  • Protection: IP44 / IP54
  • Max Pressure: 145 PSI
  • Voltage: 230V/50HZ
  • Motor Housing: Aluminum
  • Pump Body: Cast Iron/Stainless Steel/Brass
  • Horse Power: 0.5HP
  • Impeller: Brass/Aluminum/PPO
  • Wire: Copper/Aluminum
  • Stainless steel shaft
  • Cold-rolled silicon steel sheet

ASK A QUESTION ABOUT THIS PRODUCT

Please fill in the Form below and we will get back to you as soon as possible.

CONFIRM CONTACT DETAILS

Get notified when this item comes back in stock.